Found With You Tutorial

All the supplies you will need can be downloaded here.

Plug Ins Needed For This Tutorial

Simple - Top Left Mirror - here 

Mura's Seamless - Shadow - here

Xero - Seasons - here

Xero - Mistifier - here

Adjust Variations - here

Found With You Tutorial

Open up all the materials and place them in the right places. Font to fonts, gradient to gradients,
images to psp file and so on. This tutorial was written for PSP 9.

1. Open a transparent image 640 x 480.

2. Go into your material properties and bring up the materials palette.

3. Foreground color #560606 or choose your own

4. Background color #e1e0db or choose your own

5. Materials Palette - make a gradient with your two colors - Settings - Angle - 45, Repeats - 0,
Style - Linear. Invert - unchecked

6. Flood fill your transparent image with your gradient color.

7. Layers - New Raster Layer

8. Activate paint brush tool - brush lk 12 and stamp 1 time to the left side. settings - Size - 500,
step - 1, density - 100, rotation - 0 - opacity - 100, blend - normal. color - #560606

9. Effects - 3D Effects - Drop Shadow - Settings - Vertical - 1, Horizontal - 1, Opacity - 100, Blur - 1,
Color - Black

10. Adjust - Sharpness - Sharpen - Repeat if you prefer a sharper effect.

11. Open image 1 - dieter - found with you. Edit. copy and paste as a new layer. Blend
Mode - Burn - Opacity - 50. Move to the right side of the background.

12. Layers - Duplicate image 1. Blend Mode - Luminance (Legacy). Opacity - 50

13. Effects - Edge Effects - Enhance.

14. Open image 2 - bene - found with you. Edit. copy and paste as a new layer. Blend
Mode - Normal - Opacity - 100. Move to the right side of the background in the bottom corner.

15. Effects - Edge Effects - Enhance.

16. Layers - Duplicate image 2. Blend Mode - Normal. Opacity - 100

17. Move duplicate image 2 into the upper right corner.

18. Open image 3 - lisa - found with you. Edit. copy and paste as a new layer. Blend
Mode - Normal - Opacity - 100. Move into the upper left hand corner any way you like.
I just made a simple little half loop.

19. Effects - Simple filter - Top Left Mirror.

20. Open image 4 - lisa - found with you. Edit. copy and paste as a new layer. Blend
Mode - Normal - Opacity - 100. Move to the bottom center of your background between
the woman and the flowers.

21. Materials Palette - When you are happy with the placement of your hearts (image 4) go
to your material palette and move image 4 under image 2.

22. Open image 4 - lisa - found with you. Edit. copy and paste as a new layer. Blend
Mode - Normal - Opacity - 100. Move to the top center of your background between
the woman and the flowers.

23. Image - Mirror

24. Materials Palette - When you are happy with the placement of your hearts (image 4) go
to your material palette and move image 4 under the duplicate image 2.

25. Layers - New Raster Layer

26. Foreground color #560606 or choose your own

27. Flood fill your new layer with your foreground color.

28. Materials Palette - Highlight new raster layer flood filled with #560606. Blend Mode - Soft
Light - Opacity- 70.

29. Layers - Merge All Flat

30. Effects - Mura's Seamless - Shadow - Settings - Offset X - 132, Offset Y - 132, Color R - 0,
Color G - 0, Color B - 0, Effects - 255.

31. Effects - Xero - Seasons - Settings - Red Cut/Boost - 0, Green Cut/Boost - 5, Blue Cut/Boost - 5,
Effect Strength - 255.

32. Effects - Xero - Mistifier - Settings - Haziness - 128, Strength - 128, Red Mist - 255,
Green Mist - 255 - Blue Mist - 255

33. Adjust - Brightness and Contrast - Clarify - Setting - Strength of Effect - 1.

34. Open image 5 - sbg text - found with you. Edit. copy and paste as a new layer. Blend
Mode - Normal - Opacity - 100. Move to the center of the background on the right side in
between the two flowers.

35. Effects - 3D Effects - Drop Shadow - Settings - Vertical - 1, Horizontal - 1, Opacity - 100, Blur - 1,
Color - Black - This step is optional. I chose not to do this.

36. Layers - Duplicate Layer

37. Layers - Merge All Flat

38. Image - Add Border - 2 pixels. Flood - fill with sbg gold pattern sample or color of your choice.

39. Effects - Texture - Silverbeads fill - Settings - Size - 100, Smoothness - 0, Depth - 1, Ambience - -,
Shininess - 0, Color - White, Angle - 315, Intensity - 50, Elevation - 30.

40. Adjust - Sharpness - Sharpen. - Repeat - Selections - Deselect.

41. Image - Add Border - 6 pixels. Select with Magic wand.

42. Foreground color #560606 or choose your own

43. Background color #e1e0db or choose your own

44. Materials Palette - make a gradient with your two colors - Settings - Angle - 45, Repeats - 0,
Style - Linear. Invert - unchecked

45. Flood fill your transparent image with your gradient color.

46. Layers - New Raster Layer

47. Foreground color #560606 or choose your own

48. Flood fill your new layer with your foreground color.

49. Materials Palette - Highlight new raster layer flood filled with #560606. Blend Mode - Soft
Light - Opacity- 70.

50. Layers - Merge All Flat

51. Adjust - Add/Remove Noise - Add Noise - Settings - Gaussian - checked, Noise - 30,
Monochrome - checked. Repeat.

52. Adjust - Sharpness - Sharpen.

53. Effects - 3D Effects - Inner Bevel - Settings - Bevel - Straight (1), Width - 20, Smoothness - 2, Depth - 2,
Ambience - 8, Shininess - 18, Color - white, Angle - 315, Intensity - 37, Elevation - 37.

54. Selections - Select None.

55. Image - Add Border - 2 pixels. Flood - fill with sbg gold pattern sample or color of your choice.

56. Effects - Texture - Silverbeads fill - Settings - Size - 100, Smoothness - 0, Depth - 1, Ambience - -,
Shininess - 0, Color - White, Angle - 315, Intensity - 50, Elevation - 30.

57. Adjust - Sharpness - Sharpen.- Repeat - Selections - Deselect.

58. Image - Add Border - 30 pixels. Select border with magic wand. Edit - copy and paste into the selection
with sbg border pattern - found with you

59. Layers - New Raster Layer

60. Foreground color #560606 or choose your own

61. Flood fill your new layer with your foreground color.

62. Materials Palette - Highlight new raster layer flood filled with #560606. Blend Mode - Soft
Light - Opacity- 70.

63. Layers - Merge All Flat

64. Effects - Adjust - Variations - click on original and then click on darker once.

65. Adjust - Sharpness - Sharpen. Repeat.

66. Effects - 3D Effects - Inner Bevel - Settings - Bevel - Edge (3), Width - 8, Smoothness - 0, Depth - 4,
Ambience - -30, Shininess - 0, Color - white, Angle - 315, Intensity - 50, Elevation - 50

67. Selections - Select None.

68. Image - Add Border - 2 pixels. Flood - fill with sbg gold pattern sample or color of your choice.

69. Effects - Texture - Silverbeads fill - Settings - Size - 100, Smoothness - 0, Depth - 1, Ambience - -,
Shininess - 0, Color - White, Angle - 315, Intensity - 50, Elevation - 30.

70. Adjust - Sharpness - Sharpen. - Repeat - Selections - Deselect.

71. Image - Add Border - 6 pixels. Select with Magic wand.

72. Foreground color #560606 or choose your own

73. Background color #e1e0db or choose your own

74. Materials Palette - make a gradient with your two colors - Settings - Angle - 45, Repeats - 0,
Style - Linear. Invert - unchecked

75. Flood fill your transparent image with your gradient color.

76. Layers - New Raster Layer

77. Foreground color #560606 or choose your own

78. Flood fill your new layer with your foreground color.

79. Materials Palette - Highlight new raster layer flood filled with #560606. Blend Mode - Soft
Light - Opacity- 70.

80. Layers - Merge All Flat

81. Adjust - Add/Remove Noise - Add Noise - Settings - Gaussian - checked, Noise - 30,
Monochrome - checked. Repeat.

82. Adjust - Sharpness - Sharpen.

83. Effects - 3D Effects - Inner Bevel - Settings - Bevel - Straight (1), Width - 20, Smoothness - 2, Depth - 2,
Ambience - 8, Shininess - 18, Color - white, Angle - 315, Intensity - 37, Elevation - 37.

84. Selections - Select None.

85. Image - Add Border - 2 pixels. Flood - fill with sbg gold pattern sample or color of your choice.

86. Effects - Texture - Silverbeads fill - Settings - Size - 100, Smoothness - 0, Depth - 1, Ambience - -,
Shininess - 0, Color - White, Angle - 315, Intensity - 50, Elevation - 30.

87. Adjust - Sharpness - Sharpen.- Repeat - Selections - Deselect.

88. Text Tool - Settings - Create as - vector, Direction - up and down, Font - MoonDanceOne Size - 14,
Stroke width - 0, Font Style - Bold/Italic, Alignment - center, Anti-alias - sharp, Line style - solid. Type in your
name or initials.

89. Layers Palette - Select Vector layer and click on the plus sign in front of it. Click on the text and right
click your mouse. A menu will open up. Scroll up to properties and click on it. Stroke should be checked
and the little box should have your gold pattern in it. Fill should also be checked and should have your
black background color in it. Stroke width should be 0 and the line style should be solid. Visible
should be checked. Anti-alias should be checked. Once all these are correct click okay.

90. Layer Palette - Highlight your vector layer, right click on your mouse and convert to raster layer.

91. Effects - 3D effects - drop shadow - settings: vertical 1 - horizontal 1 -
opacity 50 - blur 5 - color black. Adjust - Sharpness - Sharpen

92. Layers - Duplicate Layer. Repeat.

93. As an alternative you may use your watermark.

94. Layers - Merge all flat

95. If you are satisfied with your image then you are finished.

96. You are now all done and I hope you enjoyed this tut.

 

Credits
 
Mists by Sabrina Buck Graphics
 
Mists & Tubes by Lisa - ArtInfinity Tubes
 
 
Mists & Tubes by Dieter - For Your Eyes Only Sweety
 
Mists & Tubes by Monique - For Your Eyes Only Sweety
 
Song Credit
Song is Because You Loved Me by Celine Dion.

Created March 25, 2008

Hit Counter

© Sabrina Buck Graphics 2005 - 2008. All Rights Reserved.